Solid-state Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements High-speed models with optimum input ratings for a variety of sensors are available. Input Modules and Output Modules that can be used for the G2R are available. Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. Incorporating an easy-to-see monitoring indicator. Approved by UL, CSA, and TUV with -UTU Version. RCE Ordering Information Input Module Isolation Photocoupler Indicator Yes Response speed --- Logic level Rated input Supply voltage Supply current 4 to 32 VDC 0.1 to 100 mA Model voltage 100 to 240 VAC G3R-IAZR1SN High-speed g s eed (1 kHz) kH ) 5 VDC G3R-IDZR1SN Low-speed o s eed (10 Hz) H ) 5 VDC 12 to 24 VDC G3R-IDZR1SN-1 12 to 24 VDC Output Module Isolation Phototriac Indicator Yes Zero cross function Yes Applicable output load 2 A at 75 to 264 VAC Rated input 5 to 24 VDC No Photocoupler Note: --- Accessories (Order Separately) Model P2RF-05-E Number of poles 1 pole (G2R: 1 pole usage) Connecting Socket Attaching Plate Model P2R-P 204 Applicable Socket P2R-05A G3R-OA202SZN G3R-OA202SLN 2 A at 4 to 60 VDC G3R-ODX02SN 1.5 A at 40 to 200 VDC G3R-OD201SN When ordering a TUV approved model, add "-UTU" to the model number as shown below: Example: G3R-OA202SZN-UTU. Track/Surface Mounting Sockets Model G3R-I/O G3R-I/O I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication Specification AC IN Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output DC OUT Output module, DC output Mark attached to the top of the product Specifications Ratings Input Module Input Model Rated voltage Operating voltage Input current Must operate voltage Must release voltage G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min. G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. G3R-IDZR1SN-1 Output Model Logic level supply voltage G3R-IAZR1SN 4 to 32 VDC Logic level supply current 0.1 to 100 mA G3R-IDZR1SN G3R-IDZR1SN-1 Output Module Input Model G3R-OA202SZN Rated voltage 5 to 24 VDC Operating voltage 4 to 32 VDC G3R-OA202SLN G3R-ODX02SN Input current 15 5 mA max. a ( t 25C) (at Must operate voltage Must release voltage 4 VDC max. 1 VDC min. 8 mA max. G3R-OD201SN Output Model G3R-OA202SZN Load voltage Load current (see note) Inrush current 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle) G3R-ODX02SN 4 to 60 VDC 0.01 to 2 A 8 A (10 ms) G3R-OD201SN 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms) G3R-OA202SLN Note: The minimum current value is measured at 10C min. 205 G3R-I/O G3R-I/O Characteristics Input Module Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1 Operate time 20 ms max. 0.1 ms max. 15 ms max. Release time 20 ms max. 0.1 ms max. 15 ms max. Response frequency 10 Hz 1 kHz 10 Hz Output ON voltage drop 1.6 V max. Leakage current 5 A max. Insulation resistance 100 M min. between input and output Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 Ambient temperature Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) Approved standards UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TUV File No. R9650094 (EN60950) Ambient humidity Operating: 45% to 85% Weight Approx. 18 g Output Module Item G3R-OA202SZN G3R-OA202SLN G3R-ODX025N Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. 2 ms max. Response frequency 20 Hz 100 kHz Output ON voltage drop 1.6 V max. Leakage current 1.5 mA max. Insulation resistance 100 M min. between input and output Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 Ambient temperature Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) Approved standards UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TUV File No. R9650094 (EN60950) Ambient humidity Operating: 45% to 85% Weight Approx. 18 g 206 G3R-OA201SN 2.5 V max. 1 mA max. G3R-I/O G3R-I/O Engineering Data Load Current vs. Ambient Temperature Characteristics G3R-ODX02SN (4 to 60 VDC) G3R-OA202SZN/OA202SLN 4-point mounting (see note 1) 4-point mounting (see note 1) 2 2 Single-point mounting 1 0.7 0.5 2 16-point mounting (see note 2) 1.5 1.4 Single-point mounting 1 Load current (A) 16-point mounting (see note 2) 1.5 1.4 Load current (A) Load current (A) G3R-OD201SN (40 to 200 VAC) 0 20 30 40 55 60 80 100 -30 -20 Ambient temperature (C) Note: 1.1 1 Single-point mounting 16-point mounting (see note 2) 0.6 0.5 0.5 -30 -20 4-point mounting (see note 1) 1.5 0 20 40 55 60 80 100 -30 -20 Ambient temperature (C) 0 20 40 55 60 80 100 Ambient temperature (C) 1. When G730-Z0M04-B is mounted. 2. When G70A-Z0C16 is mounted. Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3R-OA202SZN/OA202SLN G3R-ODX02SN G3R-OD201SN 10 10 9 9 8 8 20 10 10 30 50 100 200 500 1000 5000 Inrush current (A) Inrush current (A) Inrush current (A) 30 7 6 5 4 3 7 6 5 4 3 2 2 1 1 0 10 Energizing time (ms) 30 50 100 300 500 1000 2000 Energizing time (ms) 0 10 30 50 100 300 500 1000 2000 Energizing time (ms) Operation Precaution of Mounting Output Modules With up to four G3R SSRs mounted closely and side by side, 2-A loads can be switched. EEEE EEEE EEEE EEEE G3R EEEE EEEE EEEE EEEE G3R With a G3R SSRs mounted every other slot, 2-A loads can be switched. EEEEEEEEEEEE EEEEEEEEEEEE EEEEEEEEEEEE EEEEEEEEEEEE G3R 207 G3R-I/O G3R-I/O Dimensions Note: All units are in millimeters unless otherwise indicated. G3R Terminal Arrangement/ Internal Connections (Bottom View) 1 5.2 3 (+) 4 9.6 0.5 29 max. 1 13 max. 5 28 max. (-) 17.4 4.75 4 Load 5 7.5 3 4.7 Input 0.5 4.75 4 10 1 5 (-) (+) 2 20 Connecting Sockets Connecting Socket Attaching Plates P2RF-05 G3RZ Relay 4 dia. 4.2-dia. hole 71.5 max. P2RF-05 Socket 58.5 * M3 (M3 x16) or 3.2-dia. hole 19.5 max. 30 max. 54 max. * Indicates a value when using the PFP-jN Supporting Rail. The value is 67.5 when using the PFP-jN2. G3RZ Relay P2RF-05-E 59 max. 48 max. M3.5 screw 3.2-dia. hole PFRF-05-E Socket 3.5-dia. hole 62.5 ** (66.5)*** 85.5 max. M3 or 3.5-dia. hole Indicates a value when using the PFP-jN Supporting Rail with the P2RF-05-E The value is 71.5 when using the PFP-jN2. *** Indicates a value when using the PFP-jN Supporting Rail with the P2RF-08-E The value is 75.5 when using the PFP-jN2. 61 max. P2R-05A ** 14.5 max. G3RZ Relay 35.5 max. P2R-05A Socket Five, 3x1.5-dia. hole (Panel thickness must be 1.6 to 2.0 mm.) 36 max. 208 G3R-I/O G3R-I/O 14.5 max. P2R-05P Five, 1.6-dia. hole G3RZ Relay 35.5 max. P2R-05P Socket 36 max. Dimensional tolerance is 0.1. 14 max. Five, 1.6-dia. hole P2R-057P G3RZ Relay 32 max. P2R-057P Socket 41 max. Socket Mounting Plate Use the Socket Mounting Plate when arranging several Sockets in a row. R2.25 10 ellipses Square hole 209 G3R-I/O G3R-I/O G70A I/O Block Base Ordering Information Classification Output Input Note: Internal I/O circuit common Rated voltage Model NPN (+ common) 24 VDC G70A-ZOC16-3 PNP (- common) 24 VDC G70A-ZOC16-4 NPN/PNP 110 VDC max., 240 VAC max. (see note) G70A-ZIM16-5 Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. Dimensions Note: All units are in millimeters unless otherwise indicated. G70A-ZOC16 (Output) 234 64 +0.2 35.3 -0 75 28.6 M3.5 9.2 19.6 20.7 34.2 48.7 G70A-ZIM16 (Input) 234 48.7 10.2 35.3 +0.2 -0 75 M3.5 9.2 19.6 20.7 34.2 54 210 G3R-I/O G3R-I/O Installation Terminal Arrangement/Internal Connection G70A-ZOC16-3 (NPN) - + - + Connector Terminal Arrangement (Top View) G70A-ZOC16-4 (PNP) - + - + Connector Terminal Arrangement (Top View) 211 G3R-I/O G3R-I/O G70A-ZIM16-5 (NPN/PNP) 1A1 - + - + COM. 2A1 1A2 3A1 2A2 4A1 3A2 5A1 4A2 6A1 5A2 7A1 6A2 8A1 7A2 9A1 8A2 10A1 9A2 11A1 10A2 12A1 11A2 13A1 12A2 14A1 13A2 15A1 14A2 16A1 15A2 16A2 Connector Terminal Arrangement (Top View) Precautions Refer to pages 11 to 19 for general precautions. Protective Element Connection Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component when using the SSR under an inductive load. With the SSR for DC switching, the load can be connected to either positive or negative output terminal of the SSR. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K091-E1-1A 212